Re: Northern California - AMP Powerstep
Its not difficult by anymeans. Its a little time consuming as the H2 door triggers are all independant circuits so a trigger wire needs to be tapped into each one. Off memory i think it took me about 3.5 hours doing it by myself. I'm pretty sure the full instructions for the H2 are available off amps site.
I would say going down isn't going to be a problem. What you need to watch out for is snow buildup on them. You need to make sure any time you get in that you kick off the big chunk of snow from the front wheels or they will not go up. There is some load protection built in them so if they get a certain amount of resistance it shouldn't strip the gears. The gearbox is rebuildable in the event you do strip the gears, which i believe are nylon.
Manual trigger- I've seen people tap into an extra channel on keyless entry to lower the steps...but I dont really see any value to that.
|