Quote:
|
Originally Posted by [__--MUD--__]
that plug that says BANJ is just like a locking cap that is used on a pressurised tank. Thats where you fill up w/ the water solution.
That white cup is the back feed explosion protector- If for some reason combustion feed back into the line, that cup is supposed to prevent from feeding all the way back to the generator.
There has to be a power switch for the tank unless its wired direct to the ignition. There should be a bunch of plates that are directly shorted to extract the hydrogen in the tank. If its not switched and I'm right, if there isn't any water in that tank- Those plates are still heating up.
Doesn't look like the output is connected, there should be a fitting on the plastic area intake tube someplace for that to connect to.
|
MUD, I think you're right. I remember reading about these back when I was looking at the 'fuel energizers' and other MPG-increasing gimmicks.
If it is what MUD thinks it is, and it is connected directly to the battery with no ON/OFF, I would definitely remove it sooner rather than later.