Re: Tranny cooler mod??
Installed mine yesterday. Went pretty smooth.
The new cooler is a tight fit. If you're off to the passenger side too much the hood won't close. I actually had to remove the bottom bolt on the power steering cooler so I could swing it over to the driver side. This allowed me to move the tranny cooler over just enough to 1) use the old tranny cooler mounting bolt hole on top driver side and 2) allow the hood to close. It's still tight. Could say it fit like a glove!
That could have ended up being the biggest setback, if I would have cut hoses and mounted the cooler without making sure the hood closed. Installer beware! : )
Glad to have finally got this out of the way. Next up is Corvette servo!
__________________
_____________________________________
2006 HUMMER H2
MOOG Front End
Diablo InTune w/DiabLew Tune
Cognito Steering Support
OBX LT Headers
Air Raid Filter w/Tube
External Trans Cooler -Radiator Bypass
Corvette Servo
Rancho 9000 Adjustable Shocks-
Rancho Steering Stabilizer
20" Chrome Fuel Hostage - Cooper ST Maxx
Slotted Rotors/Ceramic pads/Steel Lines
Viper Smart Start
iPod/Video Interface
HID Head and Fog Lights
Optima Red Top w/ Priority Start Cut Off Mod
|