Zing,
Just ignore the open end wires. One is a power supply for an accessory item and the other is to control a non-factory radio. Your steering wheel control will rotate through the available items as in radio am, fm, cd, and your new aux 1 and aux 2 inputs. For your H2, just insert the plugs and plug your audio sources into the two stereo inputs and your ready to close it up. As mentioned, tape off the ends of the unused open ended wires. Before you close up the dash, match your volume for your aux. inputs to the existing radio and cd as best you can to minimize the difference when rotating through your sound sources. I found the Delphi XM output at maximum is still lower in volume than the radio and cd, so if you have the XM cranked up a bit and change source to the cd or radio, you blast yourself. My Ipod is similar.
|