Chuck,
I just clued in to what you are talking about. There is no nozzle or anthing. It just a hollow plastic square with holes in it. I have the same thing on my Denali and I remembered it did the same thing. I took a small screwdriver (anything) and kept pushing and crap on the edge of the hole to "direct" the spray.
I did finally get it to spray correctly but you should be able to replace that thing for a few dollars. Also, try taking a stick pin and putting in the hole to dislodge anything that might be inside it to get it back to spraying correctly. It's a crappy design that could be knocked off by just accidentially hitting it while changing the blade.
If screwing around with it doesn't work I would just try to get the parts depart to order you one (I would doubt they stock it).
|