Guys I'm sorry I have not checked back on this thread. Anytime I have discussed something please feel free to PM Me for more info.
madcat I think if You do a search for electric radiator fans it will come up.
Basicly You remove Your mechanical fan and fan shroud. The electric fan from Eadsperformance with it's own shroud is what I used. It is for a 2005 3/4 ton chevy truck. the wiring harness You purchase from Nelsonpreformance.com He hand makes them. You can find someone with tuning sofware that will allow you to tie the harnees into the PCM harness and program it to come on and off at certain temps. I would take Pics but, My rig is in paint for ghost flames and clear coating.
It is quite simple and You will have to drill new mounting holes in the new shroud to match the prethreaded holes for the shroud screws from old shroud placement. Place rubber washer between the shroud and core support as well as washers between the radiator shroud and flat washer on the bolt to hold shroud on.
You will have to cut out a section tranny lines down on the left bottom side for new shroud to get it to fit. You splice rubber hose from the left metal tranny line and the metal You leave saved in length after cutting the section out leading to tranny cooler.
I'm sorry if I have done a poor job. I have been ill and most will tell You I go indepth to much when explaing things. I will get Pics but, I think You will find them in a search.
Rick
__________________
05 H2 SUV cus. paint, Magnuson SC 6/12lb boost, cowl hood scoop, 12" dash touchscreen, GM elec. fans, HPTuners.com tuning soft., Dynatech headers dual catback exhaust Jet Hot chrome front to back Flowmaster Super 40's, Diamo 8 Karat rims & 325X60-20" Toyo, 4 OEM Captain seats Katzkins leather, rear console computer inside running all AV/NAV etc., Infinity component system 3 amps Tsunami Caps, rear flip down 12" monitor, headrest monitors, overhead console boost, fuel pressure, & A/F ratio gauges
|