I mounted a superflow air compressor (no tank) in my 86 4runner. 3 easy steps to install.
(1) mount compressor. I mounted mine in the engine compartment.
(2) run the hot wire directly to the battery.
(3) run the ground wire.
I ran a 6' peice of air hose from the compressor along the inner frame rail to the center of my rig.
This set up will air up a 35" bfg from 10 to 30 lbs. in about 2 1/2 minutes and i only paid $90.00 w/ s&h.
I will be installing the same set up in my H3.
JP'S-H3
|