Thread: Train horns
View Single Post
  #63  
Old 06-11-2005, 04:38 PM
KenP's Avatar
KenP KenP is offline
Hummer Messiah
 
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
KenP is an unknown quantity at this point
Default

This is not a pic, but will tell you something about it:
Quote:
Originally posted by unaslob:
an intersting BTW... on train horns.. if you are going to install a REAL train horn, as in one that came off a train, depending on the horn, that is a FEDERAL offense, and it carries a 10,000 dollar fine!! I know, b/c I had to look into it.
I bought a Nathan K-5-H, very large, very loud 5 chime horn, it accepts a 1/2 pipe for air. I purchased a 135PSI 25 gallon aircompressor for it. ran a 12 foot 1/2 inch pipe to it with a ball valve at the compressor end... now the horn can operate to 140PSI, with custom ear plugs and noise canceling flight headset... I can still only get it upto about 100PSI without being physically hurt. it is incredible.. it can be heard over 5 miles away!!! there are a number of companies that make 'train horns' but they are not off of a locomotive or ever intended for one.

http://elcova.com/groupee/forums/a/tpc/f/5106011751/m/342601...606037674#4606037674
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
Reply With Quote