I have given up on the PIAAs for now and have ordered CATz MSCs which are 3 1/2 inch round auxillary driving/fog lights and plan to mount them in the existing openings. If someone came out with a bracket like AUBURN's for the factory DRL location I would be interested. Actually, someone needs to come out with a whole new plastic bumper piece with 6 inch openings in it. The SMA show car actually has PIAA 520s mounted and they fabricated the housing from steel as AUBURN did--not sure what they did with the plastic piece under the center black grill that has the hitch pin opening in it. They may have replaced it also. Their kit revolves around their heavy duty grill guard, but I was told by Cole at SMA that they would be offering them later this year. Here's his email:
Ted,
The piece that you are referring to in our show truck is actually a steel valance that we made to house the PIAA 520's, but it also the mount for our brushguard. We felt that the hood was not the ideal place to mount a brushguard if you wanted to use it for what it is designed for. The metal valance will be available later this year, and we will offer it with both sizes of holes, one for the factory DRL's and the larger for the PIAA 520's. One thing to consider is the legal issues with removing/modifying the DRL's. I am currently unaware of the current legislation, but it may be a wise idea to consider first. Keep an eye on our brushguard located at
http://smahummer.com/detail.jsp?cid=8&pid=584 for more updates on when it will be available. These photos show the steel valance with the factory DRL's.
Good luck,
Cole
Mango -- Saltwater Flyfisherman, Photographer, Varmint Hunter -- Fort Worth, Tx
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."