BLAH...BLAH....BLAH!! I am a mechanical engineer, not an E.E, so I went through the trouble of researching this online first. From what I have read, people have done the exact same mod on a variety of vehicles without any problems. Not one negative result, but that is not to say that I could be wrong. I am relying on the word of others, since this is not my expertise. Anyway, we will see. As far as your question, I connected(spliced) a new wire to the hot wire going into the signal light outlet. Then I connected the other end to the ground wire going ro the marker light, which was cut. They said this creates a "floating ground."
Thanks for your concern. I will let you guys know if there is a problem.
|