Document ID # 1170992
--------------------------------------------------------------------------------
Service VME - Loose or Wavy Lower Liftgate Molding #PI00601
Service VME --Loose or Wavy Lower Liftgate Molding
.
When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.
SERVICE VME
Some H2 Hummer customers may comment on wavy, loose or falling off lower liftgate moldings. Trucks built between VIN (last eight positions) 3H106900 and 3H107725 may have this condition. Replace molding with P/N 15187683 to repair the condition. Parts are available from Service Parts Operation.
Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.
|