[MxHonda]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">
How do you measure the difference between front to rear?

I would think you would need a point reference like one right behind the front tire and one in front of the rear tire on the kick panel. Why not just take a level on the kick panel? </div></BLOCKQUOTE>

I always measure fender height. A tape measure centered on the wheel from the ground to the fender lip. The rear on mine is 40 1/2" and the front is now 39 1/2" with 2 full turns on the torsion bar bolt.

The ride quality with 2 turns is the same as stock and raises the front to be within 1" of the rear.

As DuneH3 said, they make the adapter, (It is shown back on page 1) but many of the Colorado/Canyon guys have done 2" of lift with 6 full turns and have not had any problems. I will be leaving mine at 2 turns and report back if I have any problems.