Thread: Rubicon VS H2
View Single Post
  #24  
Old 02-08-2003, 05:13 AM
muskyman muskyman is offline
 
Join Date: Feb 2003
Location: Barrington IL/ Minocqua Wi
Posts: 49
muskyman is off the scale
Default

I built that scout from scratch

it has a 392 agricultural pump motor(18% nichol block) stroked to 414 it makes 330 to 360 hp depending on the jets and timing and fuel. well over 500 ftlbs of torque. the motor is dropped in the frame three inches to lower COG. it runs thru a 12" clutch into a T19 trans with a 6.78:1 first gear into a dana 300 TC with crawler gears.it has a rear dana 60 with 35spline axles a front dan 44 with 30 spline hub to hub. 4whl disc brakes.it weighs 4600lbs as you see it, it side hills to 44* and because it is front heavy with a low COG it climbs like you cant even believe. it has a complete enclosed belly pan that makes it dead flat underneith. it has a completly sealed intake and breather system all thru the snorkle.it has forded depths over the hood many times it submarine safe.on the front it has a hydraulic winch that combined with the boosted power steering system pulls at about 12000 lbs. it ramps 988 on a 20* ramp

it goes places a stock H1 cant even come close to. untill you ride in it and expierience what it can do ,you wouldent beleive it.

Musky:the thinking mans fish

Dirt is for playing roads are for getting there
__________________
Musky:the thinking mans fish

Dirt is for playing roads are for getting there
Reply With Quote