Re: how to remove the rear 3rd brake light setup
HumTech/Ed
Could you look back in the manual and see if there is instructions on how to remove the third brake light.
Currently everything is disassembled and the gromment going into the metal gate pulled exposing the yellow and black wire.
I went under the gate and pulled the large black grommet only to expose a large wire bundle (probably all the wires going to the exterior lights on the gate).
I cant find the plug / connector for the high mount brake light and I didnt want to cut wires, but it just feels like it is hard wired in and wont pull enough to expose a connector.
Ed, based on your picture of the manual... I think the instructions are on 8-426
Thanks
__________________
'03 H2 (name: Big Gulp)
|