<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by GMPartsGuy:
He can short the number 4 and 15 pins of his ALDL connector to get the code that is setting his light. Make a shorting wire out of a paper clip, insert it into the 4 and 15 holes then turn on the key it will start the initiate sequence with a long 2.5 sec flash, a pause, then a short flash .5 sec long, watch and count the light flashes after to decode. i.e. flash-flash, 2.5 sec pause..., flash-flash-flash-flash means code 2.4. Get back to me and I'll tell you what the fault is. </div></BLOCKQUOTE>
I did that and got code 22 thats for wires/relay. I replaced both relays, cleaned the wire plugs, and cleared the code. That lasted for ONE day. Both lights back on.
Ahhhh
I'll have to see what code I get now.
|