Ok so I have the Pictures now, They are not the best quality but it should get the job done. I can not promise this will work for your truck but I have a 2004 H2 and this is what worked for me. 13 wires all together. After Cutting the plugs off the old mirrors I wired them up to the new mirrors. and it looks like this.
So you should be able to see the wires are connected in this order
Old mirror plug Skematic
Blue Plug
Empty Empty Black Purple Empty
Empty Grey Pink Empty Empty
Black Plug
Yellow Orange Red Green Blue
Light Blue White Light Blue Light Green Empty
Order to wire the New mirror to old Plugs
Blue Plug
Empty Empty Black Purple Empty
Empty Grey Pink Empty Empty
Black Plug
Grey Black Red Green Blue
Brown Yellow Light Blue Light Green Empty
You will notice that there are a few wires that are the same in color. I am not
sure if these connect to different parts but if you get it wired and the mirror
does not work properly then simply switch the same color wires untill you
find the right pattern. I got lucky and it worked the first time and I stress the
lucky part. A final tip is to twist or solder them together separate or tape them
then pull the window and mirror control box out of the door panel and
plug up the wires to test before final assembly. When right assembly is
achieved then tape and pretty it up. Best of Luck
And when finished should look something like this
Thanks guys I hope this helps, and a big thanks out to Lone Palm for the walk through on this
B