Quote:
|
Originally Posted by Hellz
Handheld diablo predator U7193
When I got regeared, both lights came on, and the tech couldn't do anything since I had a tune installed. Even if I didn't, their HP tuner didn't go to 4.88
My diablo tuner goes from 4.56 to 5.13... Completely skipping over 4.88
I left a thread on diablos forum, they said they will have to do a custome tune for the gears and tires.
Think my only other option is to raise my gear settings and play with tire sizes until the lights go out
|
Been there, done that...
Don?t quote me on the exact number but you can?t install over 38?s on the Diablo tuner (I mean, you CAN but it will still set off lights)
With my 4.56?s and 40?s, I had to play at least 20 times with a series of combinations.
My suggestion is to set the tuner (same Diablo I have) at 37?s and increase the gear ratio.
I think I had to use 37?s with 4.90 gear ratios.
The cool thing about Diablo is it is one of the only handheld tuner you can change both tire size and gear ratios.
I spent hours figuring it out and was told the only other cure is to take the PCM to a tuner and they can change the perimeters in which the ABS sensors read the rotations.
Try what I said about the tuner, I think you?ll find it will work.
HTH?s,
Mark