Quote:
Originally Posted by tomp
Mark, no - the Cognito UCAs don't circumvent the issue with the half shafts. I know the height I provided with 37s works with no CV vibrations at 70+mph. Prior to being at 44.5" from ground to bottom of fender flare, I was at 55.5" and it vibrated at 70mph at that height so you could try something in between to see if you can get more that 44.5" height using 37s.
|
Well I guess that leaves me screwed. I'm only at 42.5" and running 35's and at 70mph, I can feel the halfshafts making a minor vibration.
I guess my only choice is to lower the front end a bit to relieve some of the bind the halfshaft is getting and replace the rear 1 1/2" spacer in the rear with perhaps a 1" spacer.
Any other suggestions?
Thanks,
Mark