Quote:
|
Originally Posted by jgmachine
Installed new relay today. Problem is still there....
|
Time for step 2...........
If the relay has been ruled out, move to the turn signal bulbs. You say that it only happens on the left side. Start with either the front or rear bulbs and replace one bulb at a time with a new one.
Also look at the socket that these bulbs fit into. Do they look corroded? rusted? warped? Any sign that might indicate that the bulb might not be sitting in properly.
Look at the back of the wiring harness that the sockets come from and look for any exposed insulation or pinching/crushing in the area.
Lastly, just as a follow up, have a meter handy and check each bulb for continuity. Adjust meter to correct setting. Just because a bulb "looks" okay does not mean there my be a crack or some kind of tiny break in the bulbs wiring.