Eric on the stock system the tweeters in the a pillars ar connected to the door speaker wires.
In my situation I have the infinity 6.5 door speakers to replace the stock ones and the set comes with a set of 1" tweeters.
The set also comes with a passive crossover. So wht I will do it run the front speaker wires from the new amp I have into the passive crossovers from the crosovers there are 2 outputs 1 set of speaker leads goes from the corssover to the tweets and the other to the door speakers (remember i am replacing them also.
I have the wiring schematic for the truck and have already figured out which wires to cut on the back of the head. you need to grab the radio on lead to power the amp on when the head is turned on and I also know which wires to cut for the front left and right door speakers and the rear left and right.
email me at mikepmorgan2adelphia.net and I can send you the .pdf file and the word doc I have an I can walk you through it..ok?
Thanks man
Take Care Mike
|