Re: 2 Inch Lift on H2.
Hey Mark...you really need to assume that the shock will also need to raise up beyond that 1/4" of space in addition to it raising up above the bolt hole in the shock extension. You also have to consider that bump stops compress when all the weight of your front end comes down hard on the stops. Please take that into consideration.
Yes, the Cognito-Bilstein shocks compress to that of the OEM shocks, plus they are longer for the needed droop required after cranking the TBs.
If the above testing proves that you are bottoming out the shocks, you can still use the shock extensions by switching to the shocks for a 2500HD which are the same extended length as the H2 OEM shock length, plus they compress shorter.
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|