Cost...<$1.00
Jump the #86 term from the parking light relay to #85 of the DRL relay. (Actually, the schematic is wrong and if you look at the bottom of the DRL relay it's actually #86. Doesn't matter anyway for this application).
Here's the pic of the jumper...Only draw back is unless you use another relay, your parking lights will be on when your DRLs are on and vice versa. Going the later route will be more involved.
The relays are a pain to lift. Use a flat blade screwdriver and GENTLY pry lose. Strip both ends of a wire and insert into terminals. Push in relay to hold in place.
#86/85 are low current terminals so you don't really need a really thick guage wire. Get one about 1/8" or so.
[This message was edited by NSXTC on January 04, 2003 at 04:55 PM.]
__________________
Regards,
David
----------
H2SUT.com
----------
Red metallic, Lux package, Poron backup sensors, throttle body by-pass, Independent dual DVDs, Volant air box, DRL mod, chrome hood handles and latch.
|