View Single Post
  #7  
Old 06-19-2009, 05:42 AM
HUMTECH's Avatar
HUMTECH HUMTECH is offline
Hummer Authority
 
Join Date: Sep 2003
Location: Canada
Posts: 1,251
HUMTECH is an unknown quantity at this point
Default Re: Eng. Fault code PO446 Evap. System need Help.

DTC P0446

This DTC tests the Evaporative Emission (EVAP) System for a restricted or blocked EVAP vent path. The control module commands the EVAP canister purge solenoid valve Open and the EVAP canister vent solenoid valve Closed. This allows vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the control module commands the EVAP canister purge solenoid valve Closed and the EVAP canister vent solenoid valve Open. The control module monitors the fuel tank pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to near 0 inches H2O in a calibrated time, this DTC sets.
The following table illustrates the relationship between the ON and OFF states, and the Open or Closed states of the EVAP canister purge and vent solenoid valves.
?
__________________
1987 Jeep YJ 403hp sbc 653hp on NOS
1998 Chev Z71
2007 Chev Trailblazer SS
Reply With Quote