Re: Windshield Replacement
I installed my roof lights and torqued and locktited my rivnuts then removed the thread locker on furnished screws and put anti-seize on them. I sealed them with marine grade silicon which will come off when unscrewed. I would still take it off myself before having the windshield replaced. This is very important stuff, because, you have to remove the dang thing to replace the bulbs too! I have a late 06 and I don't have the wind noise even with the light bar. I don't have that wad of black caulk. Just a slight humm with the protrusions the lights make which is expected. Just turn up the Monsoon!
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
|