Quote:
|
Originally Posted by clsimmon
Does anyone know the replacement bulbs/LEDs used for these 2 to 3 switches found below the 4x4 controls in the center console? My Tow and Height CTRL back lights are out, and want to see about replacing them. The spec states they are dimming LEDs, but I'm not sure if it's correct or not as most LEDs don't go out like this
|
Thanks Guruerror!
Those button packs have odd lighting. Some of are plastic posts with contacts at the bottom while others are just straight lights. Unfortunately I didn't take a lot of pics when I did my LED conversion (stupid I know) but everything is easily replaced with LED or standard filament bulbs.
You'll have to pull the center stack apart to get to the button packs. Once you have them removed the backs will pry off-carefully. Once you have access to the innards, it is as simple as desoldering the old bulb and replacing with new. If LED's are the route you want to go then you'll need some 5mm LED's diffused lens.
Hope that helps a little, if you have any other questions just let me know!