Re: LIFTED HUMMERS THREAD!!
The important part is the backspacing, not the offset. Offset is measured from the outside of the wheel to the hub, so a wider wheel will always have a higher offset. Backspacing is measured from the hub to the inside of the wheel.
In other words, two different wheels can have completely different offsets, but if their backspacing is the same, ideally, they should fit the same...I think.
My eyes just crossed...
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
|