|
#1
03-14-2010, 02:49 AM
Hummer Veteran
Join Date: Sep 2009
Location: Coudersport PA
Posts: 28
Help, rear bumper light
2006 H2, drivers side bumper light had got water in it and fried the bulb and plug. Ordered new one, replaced only to realize the wiring was bad/fried too. I am unable to find that part or part number. It looks just like a jumper or pigtail to a box. Had local shop order it and they came back with the one for the tower not the bumper itself. Not having any luck online, If someone could help me out, it would be much appreciated.
#3
03-18-2010, 02:42 PM
Hummer Expert
Join Date: Sep 2007
Location: Mason, OH
Posts: 779
Re: Help, rear bumper light
did the socket that the light goes into go bad as well? I would imagine you can salvage the socket and splice in new wiring. In fact I think most auto parts stores sell the sockets with pig tails on them. just snip off the bad wiring and splice in the new one.
#4
03-18-2010, 05:02 PM
Hummer Veteran
Join Date: Sep 2009
Location: Coudersport PA
Posts: 28
Re: Help, rear bumper light
it all was bad, new light came with no harness to it just the lense, plug and bracket. the harness that plugged into it was pretty rusted and fried too. it has a plug on the end of it that went to the bulb plug
#5
03-18-2010, 07:02 PM
Hummer Authority
Join Date: Oct 2003
Posts: 1,118
Re: Help, rear bumper light
Might try looking through this site for a pigtail replacement, good luck, Ed
http://www.oehq.com/pigtails.cfm
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 02:20 AM.
Linear Mode
