|
#1
03-04-2011, 06:06 PM
Elcova Rookie
Join Date: Mar 2011
Posts: 5
2003 h2 with p300 code
I have A 2003 H2 Giveing me a P300 code It Has new plugs,wires,both nox senors and all O2 senors have been replaced and have had the coils tested they are fine. but still giveing the code So i toke it to the dealer they can't figer out way it is giving the code it only gives the code in the mid RPM range the dealer tested the computer said it was good. HELP need to pass Ca smog !!
#2
03-04-2011, 07:58 PM
Hummer Authority
Join Date: Sep 2003
Location: Canada
Posts: 1,251
Re: 2003 h2 with p300 code
which cylinders are misfiring? if its 7 or 8 could be water in the fuel rail. Could be a bad injector. \if all cylinders on one bank are missing could be a restricted catalytic converter. Could be a plugged injector due to contamination in the fuel system. Could be intake gaskets leaking.
__________________
1987 Jeep YJ 403hp sbc 653hp on NOS
1998 Chev Z71
2007 Chev Trailblazer SS
#4
03-07-2011, 02:32 AM
Hummer Authority
Join Date: Sep 2003
Location: Canada
Posts: 1,251
Re: 2003 h2 with p300 code
Tech 2 will tell you in the misfire history which cylinders are causing the code.
__________________
1987 Jeep YJ 403hp sbc 653hp on NOS
1998 Chev Z71
2007 Chev Trailblazer SS
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 03:51 PM.
Linear Mode
