PIAA 510 for DRL

[410225]

Has anyone converted the H2 DRL to PIAA DRL into the bumper opening?
if so, how did you mount these to the existing opening since these and OEMs are different mounting system?

[twenty2]

I Did... I did!! I've got the PIAA 510's in. I'll try to take pics this weekend. I ended up turning the bracket around on the PIAA mounts and then placing washers in the back of the unit so it wouldn't bounce all over the place.

[410225]

Cool! Thanks. I am anxious to see the pics since I am buying either the 510 if it fits in the DRL location or 580 on the brushguard.

Originally Posted by twenty2

I Did... I did!! I've got the PIAA 510's in. I'll try to take pics this weekend. I ended up turning the bracket around on the PIAA mounts and then placing washers in the back of the unit so it wouldn't bounce all over the place.

[twenty2]

see if this works for you.

[410225]

Thanks. Any issues with aiming the light? I know the OEM DRLs are attached with two screws and I do not believe they are aimable.

Originally Posted by twenty2

see if this works for you.

[twenty2]

Originally Posted by 410225

Thanks. Any issues with aiming the light? I know the OEM DRLs are attached with two screws and I do not believe they are aimable.

No problems aiming. I aim mine just below the headlight beam. (gotta do that at night) so I don't blind anyone. On the PIAA bracket, there are 2 bolts to loosen to do adjustments to aim up & down.