Auto Fold Mirrors?

[H2Finally]

Any ideas how to get this done with the remote? I.e., unlock --> unfold, lock --> fold?

Would really, really be grateful, since I'm one of those that do em every single time I park, many, many times a day..

Maybe someone just tell me which cable under the mirror switches that fold/unfold both mirrors? Maybe I can hook it up with a logic that checks "engine OFF --> doors unlock --> momentary signal unfold" etc...?

Kodiakz? Phil? Para? Klaus? F5? LasVegas? Beuler?

[CONRAD II]

I had my mirrors done when I bought an aftermarket alarm system for my SUT. When I disarm my vehicle, my mirrors fold out and my AMP running boards fold down. When I arm my vehicle, my mirrors fold in and my AMP running boards fold up. I'm sure I can find out how it was done from the audio shop that installed the alarm. I totally prefer this setup for my mirrors rather than holding the fold in/out button every time I park my truck.

[H2Finally]

Conrad, that would be awesome, if you can find out for me how they wire it! Thanks a bunch!!

[CONRAD II]

I'm picking up my truck today, so I'll ask the installer when I get to the shop. When I get the info I'll post it on this thread.

[DDWH]

I fold mine many times aday also, not to mention I always fold them when I park in my garage. Would be cool if they could be programed to fold in when you turn vehicle off and then fold out when you turn the truck on.

[H2Finally]

Originally Posted by CONRAD II

I'm picking up my truck today, so I'll ask the installer when I get to the shop. When I get the info I'll post it on this thread.

Ta mahn!

[menuserve.com]

damn this would be awesome information!

[MotorsportsAuthority aka Dragon]

This wouldn't be too bad. Would you be using a factory remote or an aftermarket? The aftermarkets offer the options of sending a momentary (-) and a (+) depending on the button pressed and wire used. Worse case scenario, you'd have to use a relay. What would you say your technical level is with wiring?

[H2Finally]

Originally Posted by MotorsportsAuthority aka Dragon

This wouldn't be too bad. Would you be using a factory remote or an aftermarket? The aftermarkets offer the options of sending a momentary (-) and a (+) depending on the button pressed and wire used. Worse case scenario, you'd have to use a relay. What would you say your technical level is with wiring?

Dragon, I intend to use my factory remote.

While I am no expert, I have ran extensive wiring in the truck, and very familiar with relays. I also have experience with modules which provide the momentary (-) or (+) when triggered, if needed.

What I need is the cable color/info to tap to/from. I.e., which cable to receive trigger signal from factory remote, and which cable(s) to provide signal (with relays) to trigger the auto-fold/unfold of the side mirrors.

I'm sure many here would find this mod very useful. Any help would be awesome Dragon!!