H3 Builder I have a question

[HUMMER H3 4 ME]

Can you take a pic of some Slate Blue H3's and Superior Blues. I have said before I do have a slate pic but i have to get the rest of the pics taken before we develop, six more to go!

[VTSTOMPER]

I totally won! Come on!

[f5fstop]

Check your dash panel (bulkhead/firewall). There is a GM part number on the backside, so the dealer can do a cross check with a H3 parts manual, and see where these are used and narrow the search that way (maybe more than one on the vehicle).
They also use these types of plugs in the bottom of the rear floor pan.

[VTSTOMPER]

Man - and I thought I solved it.

I would check all the other door frames, and the doors themselves. If it is in the driveway it probably is from something that you have used there. Ins and outs so to speak...

[Jersey Guy]

Good job Mx but in the mean time im still looking

[HummerNewbie]

Glad everyone was so helpful and that you were able find where it goes. This place is invaluable.

[H3 Builder]

I looked up the part number and it doesn't come up. The underbody plugs are put in from the top ( inside ) and I believe there are 3 of them and they are round. Unless this is a old part number and I'll look through the old parts lists.

[MxHonda]

Glad you found it Jersey! Should I send the payment book along with the prize

[Jersey Guy]

thanks PARAGON I crawled under there dam that's a soild frame but unfortunately i couldnt find a hole like that worst case scenario do I really need this

[MxHonda]

Hummer Service just called me today and told me that my PRIZE was shipped!!!

[PARAGON]

If you H3 owners can't crawl around and find some likely suspects, I'll have to drive over to the dealer and wallow around under one myself.

[H3 Builder]

I can't take pics at the plant. Sence the shutdown, there's not that many here now. I don't believe we've built any Superior Blues yet.

[VTSTOMPER]

Jersey guy,
to me is looks like one that would come off the bottom/side of a door. Like a back door, or side door. Not sure...but it is worth a check.

1) Go to the back of the H3!
2) Open the door!
3) Look to the lower door frame - right next to the right (as your looking at the back of the truck) tail light.
3) Take the plug you found in the driveway.
4) Stick it in there.
5) Close door!
6) Laugh - because you solved the mystery!


Not sure if I am right...but I hope so!

[VTSTOMPER]

this is starting to bother ME! LOL!


If you have checked all the doors, and the inner door frames, my next guess is firewall or in the engine bay. I would not think that would be the spot...but by the way things are going it might be.

[MxHonda]

Could have been dropped/stuck during production and just fell out when you washed it...?

[MxHonda]

Does that mean I won???

[HummerNewbie]

jk,

Here is one thread about the marker lights noise. There are some other discussions about it as well.

http://elcova.com/groupee/forums/a/t...5/m/4521091431

[Jersey Guy]

OMG thanks for the info ill see if I can get to it if not the dealer will see me very soon ill keep in touch Mx you better send that prize to H3 Builder i will confirm once I check

[Jersey Guy]

THANK ALL OF YOU FOR HELPING LOOKS LIKE VTSTOMPER IS CLOSE I CHECKED THEY ARE BOTH IN DOES ANYONE KNOW WHERE ANY MORE COULD BE I LOOKED ALL OVER CANT FIND ANYMORE

[HummerJim]

I got under my H3 with a trouble light (I like the neon ones because they put out less heat) and couldn't find a plug like that, although a lot of spaces are covered by frame and "stuff." Geez that's a solid frame.
I agree with the others, it looks like a floor pan plug, but it could be a lower firewall plug under your blower AC on the passenger side. PFM