Traction control switch not working?

[fourfourto]

I was at the beach on sunday ,I thought I would shut off traction and fool around but it didnt do anything?.I beleve I hit the button sometime over the last 10 months and it worked?.
I did unplug it looked at pins(looked ok) and repluged it,still does not work.

Any Ideas before I bring it to the dealer I dont have a chance to bring it there next week and Im going away to Georgia the following week so its a few weeks to get it there .

Going to dealer = pain in the a s s

[Mark805]

I think you have to hold it down for like 10 seconds before it turns off and shows the message in the message center

[fourfourto]

Originally Posted by Mark805

I think you have to hold it down for like 10 seconds before it turns off and shows the message in the message center

The manual said to push button and to disable stability control hold for 5 seconds ? I did hold it for 5 to 9 seconds .
Ill try 10 seconds cant hurt.

[Waxing]

Hold the button in for 5 seconds then look where your mileage is it will say system off.

[fourfourto]

Originally Posted by Waxing

Hold the button in for 5 seconds then look where your mileage is it will say system off.

I just did it and said stab sysem off and traction light was on.
I thought you could disable traction then if you hold it for 5 seconds to disable stab system.thats what i figured from reading the manual ?
I guess it disingages both at the same time .

[NEOCON1]

i have tried and tried to turn mine off , no luck , im not sure we can turn it off , just the stability sys. and clear the warning when in 4 low .

BTMing pretty much overides it , i think

we need f5 to the rescue