AUX in for Headrest DVDs

[marin8703]

hey guys and gals. I was wondering if anypne knows how i can input video to the headrest dvds through its AUX port. I am assuming the AUX ports are on the jumper box between the two units. I looked at the box and there is a 10 pin unused connector. Has anyone done this? I would like to output video or whatever from my nav unit to the headrest screens. Instructions say its doable but im not sure how.

Wrote an email to Invision but no response yet. I need to know whats the connector type and which pin is for what.

Im not sure but this may be a part number or something CBX-3010G7GM.

Thanks for your help!

Ill post apic of the jumper box and connector in a little bit.

[HummerNewbie]

I am looking to do the same think but going the opposite way. I am looking to split the A/V feed that goes for the DS to the PS and feed it to the A/V inputs on my NAV unit. I had call the manufacture and they said they do not sell a cable to do this. I have not taken the time to look into it but was going to try to buy another cable and split it myself. Was in a higher end car audio shop yesterday for something else and asked about it. The guy said to come back next week and talk to a particular installer who might now how to do it. Post anything you find out and I will do the same

[darebren]

do you guys have the factory OEM navigation unit?

[HummerNewbie]

I have the OEM headrests but a Pioneer NAV system.

[marin8703]

I also have OEm headrests with pioneer avic-z1 unit. So far had no luck, but will keep loking and will keep posted if i find anything.

If i dont find any answers ill just start experimenting with the lil jumper box to see what is what. It would be easier to do that if I could get a male for the connector pictured bellow. It would be easier to work with. Anyone know this connector type: (the big white one)

Also took some more pics of the Box that the two headrest dvd units connect to, and the other connectors













HummerNewbie, which pioneer do you have?

[HummerNewbie]

Originally Posted by marin8703

It would be easier to do that if I could get a male for the connector pictured bellow. It would be easier to work with. Anyone know this connector type: (the big white one)

Couple of places you might look are...
www.molex.com
www.digikey.com
www.jameco.com

Originally Posted by marin8703

Also took some more pics of the Box that the two headrest dvd units connect to, and the other connectors

Where was the module located in your truck? I have not pulled mine out to check out yet. I do know that below the seat are cables with a 6 pin din connector that go the unit. I had one come disconnected at one point the the unit stopped working. That is what I was planning on splitting off of but the connectors in the module would be much easier.

Originally Posted by marin8703

HummerNewbie, which pioneer do you have?

I am running an AVIC-D1. Might consider bumping up to a Z1 after a while.