H2 lift kits? Any bolt on?

[InneedofHummer]

I know that most people say to buy a Fabtech lift, but is there a lift out there that is a bolt on. I don't want to have to pay someone to install the lift. That would likely cost $800 or more. I am trying to find something I can install. I have done several Jeep lifts, but have never done any welding or cutting. It seems as though most H2 lifts require some welding, which I think should be done professionaly. Thanks

[ib3]

Bullet proof = No Welding - Minor cutting with sawzall. But seriously not a do it your self job for every day person.

Check out levelers and shock extenders. Thats a good so it yourself, About an hour with hand tools. Just dont forget to do a alignment if you alter ride height..

[InneedofHummer]

I can't seem to find a instruction guide on Bulletproof. I think I want at least 4" of lift. I don't think I can get that w/ out a suspension lift. The Bulletproof sounds like something my buddies and I could do. Are there any other H2 lifts that are easy installs?

[ib3]

I can send you a copy of the bullet proof install guide tommorow when I get to work if you want. Its pretty close to the same as all the other lifts except you use the stock spindle so the upper control arm drops also. The results are the front differential does not have to be cut. The only welding you have to do is if you decide to put it back to stock..

[InneedofHummer]

Sounds great...thank you.

[ib3]

Are you still in need?? Or did you end up buying??

[PaHumBug]

Originally Posted by ib3

I can send you a copy of the bullet proof install guide tommorow when I get to work if you want. Its pretty close to the same as all the other lifts except you use the stock spindle so the upper control arm drops also. The results are the front differential does not have to be cut. The only welding you have to do is if you decide to put it back to stock..

Can you send me that too? Thanks

[ib3]

Originally Posted by PaHumBug

Can you send me that too? Thanks

Im having some problems with my scanner but I will get it working. there are a few steps left out, I have contacted BulletProof about them and they are going through and correcting them now.

[H2R]

Take your time alot of information but the only way to go is up.