Clear coat on after market rims went to crap

[kalantar]

Well my 20 inch Diamos went to crap only after 3 years, local shop wants $120 a piece to fix em ( 120x5 = $600 bones) Not too happy about it. Is this a do it yourself job? Is there any type of warranty with them? It is the two tone Diamo's and all the rims are messed up only on the silver parts.

[kalantar]

.

[[__--MUD--__]]

I've never had luck w/ clear coat on rims in michigan because of the salt.

That doesn't sound completely out of line... I think I would get them powder coated for close to the same price and never have to worry about it again.

[Hellz]

cut the price on them and see what you can get online selling them and then go out and buy new ones.

i imagine they are about $250 each new or so...

[Camou2]

Actually clear coating is something that a novice can do. So, I would take an hour of my time to see if I could repair it myself. Get some 300 to 600 grit sand paper and see if you can wet sand the blemish appearances away. If that works then buy a spray can of clear coat at your local auto parts store and reface the rims. If it doesn't work then you can have them professionally done. If it does work then you can spend some quality time with your truck and save $550.

[kalantar]

Good ideas, I think im gonna takle it myself and see what happens...