HID upgrades

[Humvee21]

So I've been contemplating HIDs for my 2005. I think I've found a route that I'd like to take. I will be buying these projectors made for the H1 http://www.dashzracing.com/92-01-hum...nd-bk-a11.html and retrofitting them with a HID kit. Does anyone know if I will have trouble fitting the H2 bulb (9007) into these housings?

Also, what other suggestions might you guys have?

I've tried searching but many other options are very costly.

[2010_5thgen]

i have a cheap HID kit from ebay in mine. 55 watt ballast with 6000K color. cost me 50 bucks a set and they work great. i keep a spare set in case i get a burn out. but ive had them in for almost 2 years now and havent had any issues.

[Humvee21]

Correct me if I'm wrong here, but aren't the stock H2 headlight reflectors for halogens? If so, wouldn't putting HIDs in combination with the stock reflectors make it illegal?

A couple questions about your experience:
1. Have you received any complaints (flashes) from oncoming traffic?
2. Where did you mount the ballast/how (pics if possible)?

thanks in advanced!

[2010_5thgen]

ive gotten a few flashes from on coming drivers, but then again i got flashes with the regular halogen bulbs. i mounted the ballast rightby the back of the headlight. theres 3 bolts that hold the headlight housing in. i just used one of those the hold it in place. dont go with a kit that has HID hi beams. i havent been able to getthem to work. i have halogen Hi beam and HID low. the halogen hi beams are a joke, but you can still flash them if you get flashed at. the HID Hi beam kits need grounded out and it runs alot more wires. i never got them to work so i only use the low beams HID.

[Humvee21]

Another question:

I want to get the kit off ddm tuning here: http://www.ddmtuning.com/Products/DD...ast-35W-or-55W

What is all the stuff I need to buy? I already know I want the 55W, 5000k, and need the 9007/HB5 (with Hi/Low).
Do I need the HID Harness, Adapter Cables, or Error Eliminator?

[2010_5thgen]

everything appears to be there. not sure what the box is that runs to the ballast. but it looks the same as what i have.