 |
|
01-21-2006, 01:38 AM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
I know it's not a real good pic but notice the roof? I happened to walk into the Hummer dealer today and they had just put on the shelf this 2006 front light bar.
Since it's a 2006, the connecting wire harness doesn't come with the bar, it only comes with a new 2006 H2. (of course, I'll change connectors and make my own harness)
Anyway, I know the pic ain't good but here it is.
 |
02-18-2006, 04:43 PM
|
 |
Hummer Professional
|
|
Join Date: Aug 2005
Location: HQ USAREUR & 7th ARMY, ODCS
Posts: 289
|
|
Bare with me as I'm not too keen on this. The round roof off-road lights kit comes with the harness to install. Wiring that comes down the headliner down the left pillar and connects to the fuse box. The low-profile version does not come with the harness but connects to exisitng wiring? Please clarify on what is needed to install the lights for the H2 that did not have a factory off-road light. Thank you, sorry for the low learning curve on this topic.
__________________
2005 H2 SUV (Yellow)
2003 Vert Supercharged
|
01-21-2006, 09:12 AM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, that's cheating. It's not a mod if it doesn't work.  </div></BLOCKQUOTE>
Ohhhh, it will by this evening... (Sat) LOL.
I picked it up about 5pm Friday night, by the time I got back to the shop, it was only a matter of minutes before it was installed. If it hadn't been such a long week and I wanted to go home, I would have stayed and wired it. (besides, gotta pull the Eclipse Saturday to rewire the cameras... may as well do it then)
Mark |
02-19-2006, 01:28 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
LOL, seriously, I bought the lightbar for 635 bucks. I'm almost sure they are quite a bit more expensive than that but I didn't check.
Since my bodyshop does most of the repairs for the Hummer dealer, they usually hook me up.
I could have sworn list was over 1000 bucks. Not sure though...
Mark
|
02-19-2006, 02:43 PM
|
|
Hummer Professional
|
|
Join Date: Aug 2005
Location: HQ USAREUR & 7th ARMY, ODCS
Posts: 289
|
|
OrangeCrush, Thank you for the assistance. Is the bulb H3? Did you tap the power from Z82 location inside the cabin? How do you like the illumination? I like to be able to turn it on with the high beam switch if possible in addition to the dash switch. Thanks again.
__________________
2005 H2 SUV (Yellow)
2003 Vert Supercharged
|
02-19-2006, 12:48 PM
|
|
Hummer Guru
|
|
Join Date: Dec 2004
Location: The Green Mountains
Posts: 2,823
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
how does it attach to the bar (wires)? </div></BLOCKQUOTE>
You have a couple of wires coming out close to the end of the bar. They have a factory end on them. I just cut the end off and soldered them onto a few extensions.
Mark </div></BLOCKQUOTE>
Did it look like a standard headlight harness? I would think it is the same as what I have - older style light bar. </div></BLOCKQUOTE>
Can't remember, tossed it away... but if you need to know, I can take a pic of one at the dealer. I think I saw a new bar sitting on the shelf.
Mark </div></BLOCKQUOTE>
How much did you pay for the bar if you don't mind me asking...
__________________
'05 Stealth Gray SUT
A Mellow Mix of Black & Bling
|
02-18-2006, 08:43 PM
|
|
Hummer Guru
|
|
Join Date: Dec 2004
Location: The Green Mountains
Posts: 2,823
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
how does it attach to the bar (wires)? </div></BLOCKQUOTE>
You have a couple of wires coming out close to the end of the bar. They have a factory end on them. I just cut the end off and soldered them onto a few extensions.
Mark </div></BLOCKQUOTE>
Did it look like a standard headlight harness? I would think it is the same as what I have - older style light bar.
__________________
'05 Stealth Gray SUT
A Mellow Mix of Black & Bling
|
02-18-2006, 05:58 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sportsdude:
Bare with me as I'm not too keen on this. The round roof off-road lights kit comes with the harness to install. Wiring that comes down the headliner down the left pillar and connects to the fuse box. The low-profile version does not come with the harness but connects to exisitng wiring? Please clarify on what is needed to install the lights for the H2 that did not have a factory off-road light. Thank you, sorry for the low learning curve on this topic. </div></BLOCKQUOTE>
No problem... I'll try this again.
(at least for the '06) The light bar has a small wiring harness in it. It protrudes from one end of the bar approx. 6"
You are suppose to plug that 6" protrusion harness into a factory harness that is already inside the "A" pillar (left windshield post)
The problem is that harness that is "inside" the windshield post is ONLY available as part of the main wiring harness (eg. you can't buy it separately) and ONLY on the '06's
Soooo, I just cut the factory end off of the 6' harness sticking out of the light bar, soldered some wires onto it ran my own wires into the windshield post.
HTH's,
Mark
|
02-18-2006, 11:40 PM
|
 |
Hummer Professional
|
|
Join Date: Sep 2005
Posts: 339
|
|
looks good i cant tell from the picture but i know the bar you have i want the same bar but put on the back to hook up to the reverse lights. to badd i to stupid to do it.
|
02-19-2006, 01:27 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> How much did you pay for the bar if you don't mind me asking... </div></BLOCKQUOTE>
I do....
|
02-19-2006, 09:19 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sportsdude:
OrangeCrush, Thank you for the assistance. Is the bulb H3? Did you tap the power from Z82 location inside the cabin? How do you like the illumination? I like to be able to turn it on with the high beam switch if possible in addition to the dash switch. Thanks again. </div></BLOCKQUOTE>
I actually haven't looked at the bulb in there. I'm assuming it's an H3.
Illumination is good, not outstanding but definitely good. The problem with those lights is they are not adjustable unlike the bigger KC's.
Are you sure you want the lights to come on with the highbeams? What happens if you want to flash someone oncoming that has their highbeams on? You'll probably blind them...lol.
I'm sure however with the correct wiring with a relay you could get it to work.
Like I said, a stereo shop should be able take care of that for you.
Mark
|
02-18-2006, 10:55 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
how does it attach to the bar (wires)? </div></BLOCKQUOTE>
You have a couple of wires coming out close to the end of the bar. They have a factory end on them. I just cut the end off and soldered them onto a few extensions.
Mark </div></BLOCKQUOTE>
Did it look like a standard headlight harness? I would think it is the same as what I have - older style light bar. </div></BLOCKQUOTE>
Can't remember, tossed it away... but if you need to know, I can take a pic of one at the dealer. I think I saw a new bar sitting on the shelf.
Mark |
01-21-2006, 01:38 AM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
I know it's not a real good pic but notice the roof? I happened to walk into the Hummer dealer today and they had just put on the shelf this 2006 front light bar.
Since it's a 2006, the connecting wire harness doesn't come with the bar, it only comes with a new 2006 H2. (of course, I'll change connectors and make my own harness)
Anyway, I know the pic ain't good but here it is.
|
02-18-2006, 12:05 AM
|
|
Hummer Professional
|
|
Join Date: Aug 2005
Location: HQ USAREUR & 7th ARMY, ODCS
Posts: 289
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
I know it's not a real good pic but notice the roof? I happened to walk into the Hummer dealer today and they had just put on the shelf this 2006 front light bar.
Since it's a 2006, the connecting wire harness doesn't come with the bar, it only comes with a new 2006 H2. (of course, I'll change connectors and make my own harness)
] </div></BLOCKQUOTE>
OrangeCrush - Do you know of a place to buy the stock harness? I was told GM doesn't sell it seperately.
__________________
2005 H2 SUV (Yellow)
2003 Vert Supercharged
|
02-19-2006, 12:08 AM
|
 |
Hummer Authority
|
|
Join Date: Sep 2005
Location: Texas
Posts: 1,795
|
|
If there was in the pillar, how could you hook them together?
My '06 does not have a wire harness in the left pillar. Are you sure it was not to run all the way down the pillar and into that little box(with cover) under the dash?
I would think there should have been some kind of extension harness to plug the lightbar in under the dash, even for an '06 model.
__________________
H2 SUT 4.56 Gears, Front Locker, Cognito Pitman/Idler kit & Idler Pivot Kit, Fab Tech Tie Rods, True Tech Trailing Arms, Edelbrock Panhard Rod, PML rear Diff & Tranny Pans, Corsa Exhaust, Dynatech LT Headers, Diablo Predator Programmer, Volant CAI, Warn 9500 Winch, Escort 8500x50 & ZR3 Laser Shifter, Delta Light Bar, Rancho Steering Stabilizer & Bilstein Shocks, Ron Davis Radiator, PowerSlot Rotors, Hawk Brake Pads
|
02-18-2006, 12:31 AM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sportsdude:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
I know it's not a real good pic but notice the roof? I happened to walk into the Hummer dealer today and they had just put on the shelf this 2006 front light bar.
Since it's a 2006, the connecting wire harness doesn't come with the bar, it only comes with a new 2006 H2. (of course, I'll change connectors and make my own harness)
] </div></BLOCKQUOTE>
OrangeCrush - Do you know of a place to buy the stock harness? I was told GM doesn't sell it seperately. </div></BLOCKQUOTE>
That's the point... there is no wiring harness available. The wiring harness for the lightbar is part of the factory harness.
I don't mean it's a factory harness, I mean it's PART of the whole wiring harness for the dash.... that's why I just hardwired it.
HTH's,
Mark
|
02-18-2006, 01:17 AM
|
|
Hummer Guru
|
|
Join Date: Dec 2004
Location: The Green Mountains
Posts: 2,823
|
|
how does it attach to the bar (wires)?
__________________
'05 Stealth Gray SUT
A Mellow Mix of Black & Bling
|
02-18-2006, 11:53 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
Rocket,
It would actually be easy. Once you mount the bar, you only have two wires to hook up.
A power wire which would go to the hot wire for the reverse lamps and a ground wire.
That way, it would automatically come on when in reverse.
However, I would think there would be times when you wouldn't want those lights on just because you have the truck in reverse.
Mark
|
01-21-2006, 02:19 AM
|
 |
Hummer Messiah
|
|
Join Date: Apr 2003
Location: Virginia Beach
Posts: 37,474
|
|
Hey, that's cheating. It's not a mod if it doesn't work.
__________________
"My reading of history convinces me that most bad government results from too much government."---Thomas Jefferson
|
02-19-2006, 12:27 PM
|
|
Hummer Guru
|
|
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 2,767
|
|
Tomp,
I didn't say that the plug for the light bar was in the "A" pillar, all I was saying is that there is suppose to be a plug for the lightbar to be able to be plugged in to.
I wouldn't doubt that there may be an extension but the point is, (factory option or not) it only comes on the '06's.
Sportsdude,
You're taking this to be harder than it is. It's real simple. You have two wires coming off the lightbar.
One is for power, one is ground.
It comes with a tiny switch which I mounted under the factory headlamp switch.
If you're still not sure, I would think that a stereo shop would run the wires for you for less than 50-60 bucks. (definitely less than a hundred)
It took me about an hour to wire it, solder, heat shrink tube it and tuck my wires where I wanted.
I'm with you about the 10x setup. That was the one I originally wanted but the 4 light setup suits my needs better.
If you have any questions, feel free to ask.
If I have to go so far as to go back to the dealer and take pics of a lightbar (providing they still have one in stock) I will.
HTH's,
Mark
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 09:35 PM.
|
