|
#21
09-20-2005, 08:58 PM
Join Date: Sep 2005
Posts: 8
Since they give you no instructions on how to remove and install the speed senor, I prefer to tilt vehicle with jacking and air down tires. Next time I do it I will measure the degree of tilt required, as this is where the fill hole should have been placed.
This is only maintance problem I have discovered on H3, front and read axels have drain plugs and easy refill.
#22
09-20-2005, 10:07 PM
Hummer Guru
Join Date: Jul 2005
Location: Idaho
Posts: 4,744
Save time next chang. Toward the top left rear of the trans case, by the crossmember. Add Exactly 250 ml (8.45 oz) of DEXRONŽIII fluid, install plug.
Fill hole was correct for all other applications, angles a bit different on the H3.
__________________
Black Sheep Hummer Squadron
(ME TOO)
#23
09-20-2005, 11:00 PM
Join Date: Sep 2005
Posts: 8
Thanks for the information, Do you know what other vehicles they use this transfer case in?
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 06:52 AM.
Linear Mode
