Check your bolts!!!

[Sewie]

So we noticed Neo's truck was being extra squeaky today. When we got back to the house we were able to isolate the noise. The bolt where the back of the tranny attaches to the crossmember was loose.

So I get under mine to look at it and check the bolts on the skids, UCP, etc. I noticed one of the bolts for the front driveline where it attaches to the t-case was backed almost all the way out. I checked the other three and they were all loose.

So we both tightened everything up. I checked Bebe's truck and nothing was loose, and we'll check the others in the morning.

Just a heads-up for those of you that are out banging these things around.

Good info for all of us. Enjoy the wheelin!

S.

[CO Hummer]

Originally Posted by Sewie

I checked Bebe's truck and nothing was loose

They're probably line-x'd in. Works better that loctite.

[garnerbiker]

The washboard in Death Valley rattled 2 skid plate bolts loose. I'm glad I heard them rattling around.

With these new rigs I recommend getting out the torque wrench and going over the vital area. I found others that were loose.

While you're checking your bolts, you might want to check the nutz too. Hahaha

[Tubs McFatty]

Originally Posted by garnerbiker

The washboard in Death Valley rattled 2 skid plate bolts loose. I'm glad I heard them rattling around.

With these new rigs I recommend getting out the torque wrench and going over the vital area. I found others that were loose.

While you're checking your bolts, you might want to check the nutz too. Hahaha

Hahahahaha!!!!!!!!!!!

I plan to eat you.

[TheArchiTexan]

hummbebe is very loose. Trust me on this one

[wpage]

Sounds like a few screws may be loose as well...

[H3 Hummer]

I had a two bolts missing and had to replace them. One guy had his skid plat fall off on the hi-way. This was last year I believe.

[Klint]

Mine did that too sounds like the same bolt!

[NEOCON1]

check your NUTZ