Ok, I know this isn't in the right section, but hopefully the person that can help me will see it sooner...
I'm trying to bridge two wireless routers with a Linksys Wet11 wireless bridge. The first router is a d-link wireless router with the internet connection...the IP address is 192.168.0.1. What I'm going to try to do is set the Wet11 to 192.168.0.225 static and point it to the d-link router with a cantenna. Once I get this setup, then connect the wet11 to my second router through the internet port. the 2nd router is a Netgear MR814(s) wireless router. On the netgear router, disable DHCP and set its IP address to 92.168.0.20 static. The gateway for both wet11 and netgear router will be set to the d-link address of 192.168.0.1 and DNS will be automatic.
If this works, my understanding is that the computers accessing through the second router will send their mac address' to the 1st router through the Wet11 and then be able to access the internet. Is that right?
If this isn't going to work, any other suggestions?
Thanks.