2006 H3 won't start...

[GregAFATC]

First off, I am stationed in Germany, so my options on fixing my H3 are limited. I recently had a Viper 5701 alarm/remote start put on my car by a private installer. Everything was working fine except occasionally when I remote started it and turned the key to on, the factory alarm locked light would stay on in the instrument panel. I would just press the brake, let it disengage the bypass, turn the vehicle off, restart it, and the light would go off this time. Now, yesterday I had the installer come over to hook up the wire so the heat will work when started. He was hooking up the accessory wire directly to each wire behind the 0,1,2,3,4 fan control to figure out which one he needed. He started the car with remote start, the heat turned on for a few seconds then cut off, he then turn the switch from 4 to 0 and the car shut down. Now the car won't start at all. When I put the key in the ignition, the lights, radio, and insrument cluster all work. The factory alarm lock light DOES NOT stay on and turns off like normal. When trying to crank the car it does not make any sound except I can hear something running when I lean down in the passenger floorboard(maybe on the passenger side under the hood). My car is automatic and the shifter WILL NOT move out of Park at all. The instrument cluster flashes ABS FAIL, BRAKE FAIL, and TCS FAIL(or something very close to that nature). I have no idea what is going on and my installer is not sure either. Any help would be greatly appreciated. Thanks!

Greg