Deactivating Traction Controll [B]COMPLETELY[/B]

[Easy Ed]

Eric, Don?t know if these will help but they are the best I can do.

If HUMTECH is saying to pull ETC/ECM fuse or splice into the circuit to accomplish what you are trying to do, it looks like the PINK 1339 wire goes to the Ignition 1 Voltage in cavity number 8 of the connector that goes to the EBCM which appears to be on the inside of the driver?s side frame rail. If this is all correct wouldn?t you want to splice the PINK 1339 wire in that harness, possibly some place easily accessible ?

Also, if you was to pull that fuse the manual shows that it also controls the Throttle Actuator Control (TAC) and I do not know what would happen then, hence why you might want to go straight to the pink wire coming off the cavity number 8 of the EBCM.

Hope this some where close to what you are trying to do and if anyone notices something not correct or has better info please speak up.

Good luck, Ed

P.S. Also sent to the e-mail address in your sig.


Attachment 52174
Attachment 52173
Attachment 52172