Universal Lockpick for 2006 H2 problems. Help!

[rmutchler]

Running out of options here, and CoastlETech has yet to abandon me (they've been trying), but I thought I would use this knowledge network to ask if any of you have run into a problem.

I have the GM 360 Universal Lockpick for my 2006 H2 SUT...just received it. I went in, placed the ribbon, hooked up the harness and ran wire to the fuse box and to the rear bumper for a future camera install when it comes in. Here's my problem, I get no video on my Navi Screen (touch screen) when I start or even go full power without starting (key all the way on without going so far to start). I'm getting plenty of power though.

When I turn the ignition to the first clicking point, the screen comes on and everything looks and acts perfectly on the screen and lockpick. As soon as I turn on the ignition to start, the screen goes dark and wavy and all I get is sound. I have the power wire running to the Aux Fuse and the reverse wire to the BU Lamps...but no luck Put the meter to the power wire...no problem. Am I missing the obvious?