Egan's Mini Lift

[accely]

Originally Posted by Egan

Next I moved on to the front components. Here’s the stock set up:



Removing the stock UCA was a pain because I didn’t have a pickle fork, but I eventually got it out of there. With the UCA out, I then removed the shock and shock mount. I installed the shock mount, then the new shocks. I built the Cognito UCA’s on the ground before installing each in place. Tip: grease up the sides of the UCA bushings because it will be a tight fit!

For these steps, would you recommend something like this ? Craftsman 5-Piece Pickle Fork Kits to aid in removal?
What would you do if you have the pickle fork? I guess it would make sense if i was in the process of removing the UCA but I figured I would ask in advance. Trying to get all this straight in my head. Seems like most of this isn't too difficult especially with your nice write up


Also- I assume you used the Kryptonite HD Sway Bar End Links (For 2" LEVELED Trucks), right?