Winch electric install

[rodster]

Multi-mount Warn winch rear wiring is the project.

Got the front wired up just fine and everything with the rear is good except there's no way I'm fitting one more set of #2 wires on the battery. A forum search found this (and a few similar references):

The winch leads should come straight off the battery, positive and negative. If you don't have any, pick up a couple of GM side post terinals that have the extra threaded bolt on for accessories. You can get them at PepBoys and the like for $2 or $3 each. These will make attaching the winch cables real easy, and be useful for running any other accessories in the future.

I attempted to buy that part at Pep Boys, Auto Zone and Napa and none of them had anything that looked like it would work. Napa did recommended (and I bought), post extenders with small screws on the end that will work for small terminals but the #2 connectors slide right down the post.

Any chance someone here might post a picture of the part you're using? Many thanks if you can!