Stock radio & Onstar

[Game Over]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h3'er:
Dash bezel removal.

Toyed with the awhile tried screw driver under the edge first time. then found this little trick works the best.

The 2 cigarette lighter sockets on the lower right side. use your right hand insert first 2 fingers palm up pull forward grasping tops of the lighter sockets.

Bezel should pop right off. there are several plugs on the back you will have to unclip to completely remove it </div></BLOCKQUOTE>

Are there any screws somewhere that needs to be removed before doing the two fingers in the socket trick ( sounds dirty ) or is the bezel just held in place by tight fighting it with the inside clips.

thanks

[H3 Hummer]

I got an Alpine last weekend - they thought the OS2 adapter worked with my radio also. It doesn't it only works with some of the H3's. If you have the cheesy no MP3 playing factory stereo you don't need the Os2 but you do need something else.

[h3\'er]

To Retain onstar you will also need Pac-audio's OS2 Interface