Alternatively you could order the entire plug but then you have a bigger pia connecting all the wires.
Sometimes I can't figure it out or either its clipped in somewhere in the metal plug half way in - bigger pia.
But the blue must be removed first, in a few cases it is the only holder, but that's unlikely.
Blue looks self explanatory from what I'm seeing just push in side clips as same time and pull up.
the blue pin popped out easily, but thats as far as i got.
I was able to solder onto a tiny piece of exposed wire, but it's def gonna break again.
gotta get that wire out so i can solder further away from the clip to minimize movement
thanks!
thanks!
But you'll prolly only find the whole harness...BUT check the Product Fitment/Applications section for other vehicles that it may have been used on; then go to the junkyard with a pair of wire-cutters. Snip snip and you gotta clip.
Also check the Fitment for the module that the cable plugs into. The cable itself may be model-specific due to the unique dimensions of the deuce, but the device it connects to will probably be a standard crossfit part...since you're only looking for the end connectors you should be golden 'cause those will be the same.
CNTRY
DTOM
Thread Tools
Search this Thread
Display Modes
Posting Rules