|
#1
08-17-2007, 07:34 AM
Elcova Newbie
Join Date: Jun 2007
Posts: 2
steelcraft brush grille/winch mount unit
Just wondering if anyone has any recommendations on winch/bumper grille units.
#2
08-17-2007, 02:13 PM
Hummer Novice
Join Date: Jun 2007
Location: Central Texas
Posts: 10
Re: steelcraft brush grille/winch mount unit
I have the Steelcraft brushguard/winch mount on mine. I have a Milemarker 9500C winch with 100ft of 3/8 inch synthetic line. It has been in place only since July 5th. I've given it a couple of workouts with no issues. Pulls strong and stays straight.
#3
08-19-2007, 07:00 AM
Hummer Professional
Join Date: Sep 2006
Location: Arkansas
Posts: 363
Re: steelcraft brush grille/winch mount unit
I got the same now for a year. Went on easy. It was only about $500 a year ago!
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
#4
08-31-2007, 03:35 AM
Hummer Veteran
Join Date: Oct 2005
Location: Kansas City, MO
Posts: 163
Re: steelcraft brush grille/winch mount unit
I think it's still around $605 (shipping to KC) at Angry Iron. This is the brushguard that I'm thinking about getting probably in the spring.
Bill
Last edited by BigBill : 08-31-2007 at 03:37 AM.
#5
08-31-2007, 07:39 AM
Hummer Professional
Join Date: Feb 2006
Location: Out in the windy oil field
Posts: 358
Re: steelcraft brush grille/winch mount unit
enjoy your new approch (sp?) angles when you put it on.
__________________
H3 / Superior Blue / Black Leather / Lux / Off-road / Sunroof / Tow-package / OEM rock rails / Aries Brushguard and Nerf bars (modified) / Husky mud flaps / 2.5 turns / Rino GPS dashmount
#6
09-05-2007, 07:09 PM
Hummer Professional
Join Date: Sep 2006
Location: Arkansas
Posts: 363
Re: steelcraft brush grille/winch mount unit
It really does not make much difference in approach angle. I have not hit mine yet. Probably will. If it hangs a little I will just back up and hit it at an angle or if really bad for other reasons just winch. But using that for an excuse not to get a winch and let others winch you out will not fly with the crowd I run with. Run what you brung!
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
#7
09-05-2007, 09:52 PM
Hummer Novice
Join Date: Jun 2007
Location: Central Texas
Posts: 10
Re: steelcraft brush grille/winch mount unit
It adds length to the vehicle nose, and with the roller fairlead, it might change the angle slightly.
When using synthetic line with an aluminum fairlead, you get added length but no change in angle that I can see. The lower bumper is first to touch.
#8
09-06-2007, 04:51 AM
Hummer Professional
Join Date: Sep 2006
Location: Arkansas
Posts: 363
Re: steelcraft brush grille/winch mount unit
Even with the added length above the lower bumper you have to be almost standing on your nose to hit and that roller pushed by 5000+ is not what is going to stop the H3!
__________________
Traded 06 I-5 for 08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard,BulletProof tie rods,ARBsnorkle, SyKlone prefilter,Hunner intake pipe.
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 10:20 PM.
Linear Mode
