|
#1
12-07-2005, 12:29 AM
Hummer Guru
Join Date: Jan 2004
Posts: 7,060
Ok, so my sig other has rock rails on her H3. I put them on a couple of months ago when we first got the truck. The problem was that almost every bolt was cross-threading and I had to get 4 wheel parts finish the job. they had to re-thread almost all of them.
So, now I put them on my "3" and thought I'd share a couple of tips.
The first thing I did was take out the harware, gunscrubber 
, and WD 40.
Step one: I took the gunscrubber and cleaned the threads of all road debris. Sand and dirt was in the threads. Make sure you don't get your paint!
Step two: I shot all the threads with the WD 40.
Step Three: Next I took a bolt and pre-threaded every single hole. The threads were rough on two of them. I think that would have caused some issues.
Step 4: Use the foam blocks that the rock rails were packed in for support of the rock rails. Since I was doing this by myself, I used these to get the rock rails close to the frame and wekd nuts. It made things much easier and was almost the perfect height.
Step 5: I started all of the top holes first and got them all half way in before startng the lowers. A couple of the holes weren't lined up perfectly so tightening all of the top ones down all the way would have made this harder.
Step 6: Crank all 8 bolts down.
Step 7: time to do the DR SD. Make sure not pinch the parking brake cables. I started up by those first.
It only took about 40 minutes with hand tools. I did not even need to use an air ratchet or 4 wheel parts this time.
This is not a tough mod at all. But it was very frustrating the first one I did.
FWIW,
Tim.
__________________
TAIL RATED!
#2
12-07-2005, 12:29 AM
Hummer Guru
Join Date: Jan 2004
Posts: 7,060
Ok, so my sig other has rock rails on her H3. I put them on a couple of months ago when we first got the truck. The problem was that almost every bolt was cross-threading and I had to get 4 wheel parts finish the job. they had to re-thread almost all of them.
So, now I put them on my "3" and thought I'd share a couple of tips.
The first thing I did was take out the harware, gunscrubber , and WD 40.
Step one: I took the gunscrubber and cleaned the threads of all road debris. Sand and dirt was in the threads. Make sure you don't get your paint!
Step two: I shot all the threads with the WD 40.
Step Three: Next I took a bolt and pre-threaded every single hole. The threads were rough on two of them. I think that would have caused some issues.
Step 4: Use the foam blocks that the rock rails were packed in for support of the rock rails. Since I was doing this by myself, I used these to get the rock rails close to the frame and wekd nuts. It made things much easier and was almost the perfect height.
Step 5: I started all of the top holes first and got them all half way in before startng the lowers. A couple of the holes weren't lined up perfectly so tightening all of the top ones down all the way would have made this harder.
Step 6: Crank all 8 bolts down.
Step 7: time to do the DR SD. Make sure not pinch the parking brake cables. I started up by those first.
It only took about 40 minutes with hand tools. I did not even need to use an air ratchet or 4 wheel parts this time.
This is not a tough mod at all. But it was very frustrating the first one I did.
FWIW,
Tim.
__________________
TAIL RATED!
#4
12-07-2005, 01:35 AM
Hummer Guru
Join Date: Jul 2005
Location: nonpiker
Posts: 5,900
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sewie:
Thanks for the tips. I'm picking mine up tomorrow. 
</div></BLOCKQUOTE>
PICS PICS PICS PICS
#5
12-07-2005, 01:41 AM
Hummer Authority
Join Date: Aug 2005
Location: On the Beach or at the River
Posts: 1,204
I put them on on a Friday and beat on them on Saturday. Well worth the price. My install was quick with 2 people and an air rachet.
__________________
WWW.BCBI.COM
#6
12-07-2005, 02:03 AM
Hummer Guru
Join Date: Jul 2005
Posts: 4,123
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummBebe:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sewie:
Thanks for the tips. I'm picking mine up tomorrow. </div></BLOCKQUOTE>
PICS PICS PICS PICS </div></BLOCKQUOTE>
NO PICS FOR YOU!!!!!
__________________
#7
12-07-2005, 02:04 AM
Hummer Guru
Join Date: Jan 2004
Posts: 7,060
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sewie:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummBebe:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Sewie:
Thanks for the tips. I'm picking mine up tomorrow. </div></BLOCKQUOTE>
PICS PICS PICS PICS </div></BLOCKQUOTE>
NO PICS FOR YOU!!!!! </div></BLOCKQUOTE>
X2
__________________
TAIL RATED!
#11
12-08-2005, 03:46 PM
Hummer Guru
Join Date: Jan 2004
Posts: 7,060
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by partsguy:
You have a bulb out.Third strand from the down spout. </div></BLOCKQUOTE>
DAMN IT! I hate those lights!
__________________
TAIL RATED!
#12
12-08-2005, 03:55 PM
Hummer Guru
Join Date: Jul 2005
Posts: 4,123
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by partsguy:
You have a bulb out.Third strand from the down spout. </div></BLOCKQUOTE>
LMAO!!
__________________
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 04:10 PM.
Linear Mode
