 |
|
01-25-2006, 01:57 PM
|
 |
Hummer Veteran
|
|
Join Date: Aug 2005
Location: Washington, DC
Posts: 141
|
|
So I bought the ski rack attachment for the crossbows and have an installation question. It appears that the rubber seal running through the center of the top of each crossbow must be (at least partially) removed in order to attached the ski rack. Is this correct? I assume you would just trim the rubber seal so that it runs up to the end of the ski atttachment rather than removing the entire length of the seal.
I will attach pictueres of what I'm talking about if no one has installed this yet. If you have and I'm not imagining things, please let me know as "trimming the crossbow rubber seal" was not mentioned in the installation instructions for the ski rack.
Thanks.
__________________
Birch White H3 Manual, Adventure Package, Sunroof, Trailering Package, Off-Road Lamps, Splashguards, Black Tubular Assist Steps, Black Crossbows, Mudder Mats, Ski Rack, Warn XD9000 w/ DOI Hawse Winch Bumper, DOI Prototype Skid Plates, M101A1 3/4 ton trailer.
|
01-25-2006, 01:57 PM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: Washington, DC
Posts: 141
|
|
So I bought the ski rack attachment for the crossbows and have an installation question. It appears that the rubber seal running through the center of the top of each crossbow must be (at least partially) removed in order to attached the ski rack. Is this correct? I assume you would just trim the rubber seal so that it runs up to the end of the ski atttachment rather than removing the entire length of the seal.
I will attach pictueres of what I'm talking about if no one has installed this yet. If you have and I'm not imagining things, please let me know as "trimming the crossbow rubber seal" was not mentioned in the installation instructions for the ski rack.
Thanks.
__________________
Birch White H3 Manual, Adventure Package, Sunroof, Trailering Package, Off-Road Lamps, Splashguards, Black Tubular Assist Steps, Black Crossbows, Mudder Mats, Ski Rack, Warn XD9000 w/ DOI Hawse Winch Bumper, DOI Prototype Skid Plates, M101A1 3/4 ton trailer.
|
01-25-2006, 05:24 PM
|
 |
Hummer Professional
|
|
Join Date: Oct 2005
Location: Maple Valley,Wa
Posts: 339
|
|
Personally I just pulled out the whole seal so when I take the rack off I have one whole piece. It seams to slide in and out pretty easily. This way I can put it all back in the spring-fall.
I thought about trimming it too but I dont keep the ski rack on but 3-4 months 
__________________
07 H2 SUT Glacier Blue - Limited Edition 
08 H3 ALPHA Carbon Black
Dear GM: PLEASE SELL ME AN HX
|
01-26-2006, 08:03 AM
|
|
Hummer Veteran
|
|
Join Date: Dec 2005
Location: CA
Posts: 85
|
|
I did the same thing. Pulled the rubber out and that way you have the full strip when you remove the rack. I ended up using my old Thule 725 with a special kit to fit the H3 crossrail. It was much cheaper  .
The H3 Ski Racks are actually made by Thule with Hummer Logo. The only difference was that they have special mounting bolts for the cross rail. Where the Thule models do not have this kit. |
01-26-2006, 12:19 PM
|
|
Hummer Veteran
|
|
Join Date: Aug 2005
Location: Washington, DC
Posts: 141
|
|
I'm probably just going to keep the ski rack in year round. In the summer it will transport a wake board and maybe a surfboard too if it will fit.
Thanks for the information.
__________________
Birch White H3 Manual, Adventure Package, Sunroof, Trailering Package, Off-Road Lamps, Splashguards, Black Tubular Assist Steps, Black Crossbows, Mudder Mats, Ski Rack, Warn XD9000 w/ DOI Hawse Winch Bumper, DOI Prototype Skid Plates, M101A1 3/4 ton trailer.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 03:13 PM.
|
